XTC-3D - High Performance 3D Print Coating

Description: XTC-3D is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use – 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface - XTC-3D can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D does not contain VOC’s, phthalates or phosphates. Adult Supervision Required. Keep Out of the Reach of Children. XTC-3D does not melt plastic. Two liquids are mixed together and brushed onto any 3D print, fabric, wood, and more. Coating self-levels and wets out uniformly without leaving brush strokes. 1 oz covers 100+ square inches. 90% Time & Labor Savings means the need to post finish is almost eliminated. XTC‑3D can be mixed with metal powders, SO-Strong tints, and Ignite or UVO pigments making adding colors and metal effects easy.

Price: 56.81 USD

Location: Brentwood, New York

End Time: 2025-01-09T11:42:17.000Z

Shipping Cost: 0 USD