Speedway Motors Swing Mount Hydraulic Clutch Pedal Kit: 7:1 Ratio I-Beam Arm

Description: Reinforced Pedal Arm: The swing mount clutch pedal boasts a high-strength reinforced I-Beam style forged 7:1 ratio arm with a non-skid waffled pedal pad that offers lateral adjustability to cater to driver preference or required clearance., Durable and Lightweight Construction: Made of lightweight aluminum with a black E-Coat finish, this clutch pedal assembly is designed to mount the master cylinder forwardly outside the firewall and is compatible with Wilwood vertical mount flange master cylinders., Efficient Slave Cylinder: Speedway's pull-type slave cylinder with a 7/8" bore is ideal for clutch use, pairing seamlessly with stock-style hydraulic throwout bearings or Ram Couplers, and comes equipped with an inverted flare female inlet and necessary bleeders., Compact Master Cylinder: The Speedway Hydraulic Clutch Pedal Kit, Swing Mount Sku # 91029989 Mfr. Part # 91029989 Condition New Brand Speedway Motors Sold Kit Details Info Swing Mount Clutch Pedal This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. This item features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 7:1 ratio pedal Arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Aluminum construction Black E-Coat finish Forward mount facing Pull-Type Clutch Release Slave Cylinder Speedway pull type slave cylinder with 7/8" bore for clutch use. Works great with stock-style hydraulic throwout bearings or Ram Couplers. Has a 3/8"-24 inverted flare female inlet. Bleeder adapter and bleeder are included. Ram shaft is 3/8" O.D. Cylinder body is 4.09" long Cylinder body is 1-7/16" O.D. at end by fittings Cylinder body is 1-3/8" at opposite end of fittings Note: For most multi-disc clutch set-ups we recommend the use of a smaller 3/4" bore master cylinder. Clutch Master Cylinder Small Speedway master cylinder for clutch applications. Lightweight, space-saving alternative to full size master cylinders Fits popluar clutch and small brake applications 3/4" Bore 3/8"-24 inverted flare fitting included 1.4 oz. reservoir 5/16"-24 thread pushrod Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. . Heim Rod End Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact). Included in this Kit: (1) Swing Mount Clutch Pedal - 83534013834 (1) Pull Type Slave Cylinder - 91025604 (1) Clutch Master Cylinder - 91025680 (1) Standard Heim End 5/16" - 1750202 Charts (PDF) (PDF) Installation Tips Master Cylinder: If you wish to use an AN3 or AN4 hose with this master cylinder consider part number 617-2060 or a 617-4030 combined with a stat o seal such as 425178006ERL Heim End: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads. Specs Color Black Mount Position Swing Mount Facing Forward Balance Bar Yes Finish EDP Coated Pedal 1 Ratio 7:1 Pedal 1 Length 12 Position Firewall Master Cylinder Mount Type Forward MFG. Part # 91029989 Reviews Yes I would buy this again. Rated by Kelly Sharpe on February 22, 2021 Summary: Very happy with it. Everybody at Speedway were very helpful. If I could change anything it would be to have a little bit more adjustment for the clutch pedal. I had to make a little piece just to give me a little more real estate. Other than that would totally buy it again and recommend it to a friend Yes, I recommend this product. I would buy again good quality Rated by Me on November 05, 2020 Summary: Swapping clutch slave was definitely different since it pulls in stead of pushes but it wasnt that bad. Yes, I recommend this product. I would buy this product again Rated by Motocross on April 10, 2020 Summary: It was exactly what I needed. Yes, I recommend this product. Good value and quality Rated by Ron on March 03, 2020 Summary: building a custom 47 Chevy pickup and the headers were getting in the way of the typical clutch linkage...converted to hydraulic to eliminate the problem Yes, I recommend this product. Great product Rated by John on February 16, 2020 Summary: Pedal for new street stock Yes, I recommend this product. Related Items / Suggested Parts Speedway Hydraulic Clutch Floor Mount Pedal Kit Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 176.99 USD

Location: Lincoln, Nebraska

End Time: 2024-07-27T12:04:53.000Z

Shipping Cost: 0 USD