Description: PowMr MPPT 60A Solar Charge Controller 48V 36V 24V 12V Battery Auto LCD Backlight MPPT 60AMP Solar Charge Controller For 12V 24V 36V 48V DC Battery Regulator Advantages: 【Software Update MPPT Design 】100% 60A MPPT solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%. Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. 【Multiple Battery Adaptation】 Fit for USER(can be set Lithium Battery, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG. 【Full System Protection】Backlight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature. ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. 【Fan Heat Dissipation】Intelligence Fan-on temperature >45℃ and off < 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use. Suitable for RVs, Commercial Vehicles, Boats, Yachts, and Solar system. 【Notiction】If you use sealed lead acid, vented gel battery, and etc, you donn't need to set any parameters, the controller can adjuste automaticly and work normally; but if you use lithium batteries, you need to properly adjuste parameters according to the actual voltage of the battery, becauese the voltage of lithium ion batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V. FEATURE: Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage), floating charge Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user) Soft start time ≤1S, Dynamic response and recovery time 100us Max efficiency ≥98.1%, PV utilization ≥99% In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals MULTIPLE ELECTRONIC PROTECTIONS Short-circuting Reverse-current Overcharging Overload Over-discharging Reverse polarity protecti Remarks: 1. The maximum PV input voltage (Voc): DC160V (The controller can not work with this long duration voltage, which will interrupt the controller. Refer to the input voltage of PV). 2. The output port is only for lamps (12V system less 60W, 24V/36V/48V system less 100W) and will be burned if connected to other loads. The battery output is not reverse polarity protection. 3. Always connect the battery first!!! Make sure the battery voltage is sufficient for the controller to recognize the correct system voltage. The order of dismantling contradicts the order of wiring. 4. Do not connect any inverter/wind/generator or charger to the controller, please connect the inverter to the battery side. 5. Ensures the solar input voltage exceeds 3V or more than the battery voltage and the total input power exceeds the max. , the charging current is almost zero when the controller has trickle charge. Parameter Model Name MPPT-60A Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 12V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V~DC60V) Soft start time ≤1S Dynamic response and recovery time ≥98.1% (Voc is 1.5 or 2 times than battery, then it’s best efficiency) PV utilization ≥99% Input specification Voc from PV( Make sure the Voc of PVmeeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. ) 12V system (DC20V~DC80V) 24V system (DC37V~DC105V) 36V system (DC50V~DC160V) 48V system (DC72V~DC160V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.) The maximum PV input power(The total power rated of PV can’t be over this watt that will break the controller.) 12V system (720W) 24V system (1440W) 36V system (2100W) 48V system (2800W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 60A Temperature Coefficient ±0.02%/ centi-degree Automatic temperature compensation 14.2V-(Max temperature-25 centi-degree)*0.3 Output voltage ripple-peak 100mV Output voltage accurac ≤±1% Input Anti-intrusion protection yes Temperature Protection 75°C Temperature increased protection Output power will reduce when it’s more 70 °C Output power will be normal when it’s less 55 °C Fan-on temperature >40 °C Fan-off temperature <35 °C Acoustic noise ≤40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN61000, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 1.1 Gross weight(Kg) 1.2 TIPs Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER connect the solar panel array to the controller without a battery DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery. Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. if input power is too low for max input power, it may be appears to have been discontinued., the charging current almost be zero when controller is floating charge. Parameter Setting RulesFloating voltage > Low voltage reconnect > Low voltage discharge. The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable). Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation. When controller makes buzzing sound because of It's working hard to dissipate heat for your controller. Rest your heart, it will be stop when temperature return to normal. Remove all the debris around the controller ( leaving a space of approx. 5.91in ).Make sure all connections going into and from the controller are tight. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other. Package include 1x 60A MPPT solar controller 1xuser manual 1x Mounting caps 1x Screws PaymentDelivery detailsTerms of salesContact us Payment 1. We can accept PayPal only 2. Please pay for your order within 2 days before order close 3. We will send to what address you leave on eBay, if you want to change it, please contact us within 2 hours after you pay. Delivery details 1. Items are generally shipped out within 24 hours after your payment has been cleared (Sat. & Sun. excluded.) 2. Orders from the United States will all be shipped out via USPS/UPS. The shipment usually takes 1-4 business days( Exclude public holiday), if you need the item urgently, please contact us for detail before purchase. Whole shipping time is estimated time, it may be different at actual. Hope get your understanding. 3. We ship to US ONLY. 4. All items will be shipped to what address you leave on eBay. Please check your address information before place the order. If you want to change it, please contact us within 2 hours after you pay. 5. We are not responsible for wrong or undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address. Terms of sales 1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired. 2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part. 3. For all returned products, Please contact us for the returning address and Pls do not open return case. 4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. Contact us 1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours. 2. Feedback is important to us, we will leave positive to our customers. 3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. 4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
Price: 84.69 USD
Location: Rowland Heights, California
End Time: 2024-11-26T08:38:12.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Current Output: 60A
Power Source: Solar
Inverter Technology: Battery-Based
Color: Silver
Current Rating: MPPT 60A
MPN: 41920319T2DV5081
Material: Aluminium alloy
Working temperature: -20~55℃
High Efficiency Charging: Adopting MPPT
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC
Voltage: 12/24/36/48V
Connector Type: MC4
Model: HHJ-60A
Features: LCD Display
Power dissipation: ＜50mAh
Country/Region of Manufacture: Unknown
Charging Mode: MPPT (Maximum Power Point Tracking)
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed
Power: 720W-1880W
