Description: Ancel S3000 Automotive EVAP Smoke Machine Diagnostic Car Leak Detection TesterANCEL S3000 Car Smoke Leak Detector EVAP Smoke Machine Diagnostic Tool Car Fuel Pipe Leak Detector Tester Auto Vacuum TesterWith ANCEL S3000 EVAP smoke machine, you can greatly reduce the troubleshooting duration for vacuum leaks and other problems. Smoke coming out of the electrical or engine components is always a bad sign, especially when it’s detected in your car, as there're lots of components in a car system, it is very difficult to accurately diagnose the root cause of the problem, There’s nothing more frustrating than trying to track down a pesky vacuum leak without the right tools. You don’t want to spend a ton of money on a mechanic. thus, ANCEL S3000 Automotive Smoke Machine is one of the most useful diagnostic tools you must have to detect the leaks.What ANCEL S3000 EVAP Smoke Machine Leak Tester Can Do for You?🚩Built-in Air Pump Saves Time and Money:ANCEL S3000 smoke machine automotive comes with tons of accessories that allow you to use it on just about any vehicle, unlike other EVAP smoke machines that you’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, ANCEL S3000 smoke machine automotive already has that feature built-in. So you’re saving some extra money!🚩 Dual Testing Model:ANCEL S3000 EVAP smoke machine come with a dual testing model including air mode and the smoke mode. Air Mode:Independent controlled built-air pump. Smoke Mode: Independent controlled smoke generator. These enable you detect the leaks precisely.🚩 Instant Smoke Generation:Press Smoke Control switch, the LED Indication would turn GREEN, and the car smoke tester start to generate smoke within seconds. One of the biggest hassles with the automotive smoke machines is the time of heating of the device. You won’t have to wait for the tester to warm up with ANCEL S3000 smoke machine automotive.🚩 Overload Protection:ANCEL S3000 automotive smoke machine leak detector has built in self-protective system:Overheat and Anti-frost Protection. When the temperature of the device exceeds 120℃, power protection will be intelligently activated to turn it off. The device can also work normally at -20℃. You don’t have to worry about switching on and off the machine constantly during diagnosis. The system takes care of the load for you.🚩 Wide Compatibility:ANCEL S3000 smoke machine automotive used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. The smoke machine automotive is suitable for all makes and models of cars.🚩 Various System Test:Crankcase System Test; Intake System Test; Car Sealing Test; Fuel Tank System Test; Turbo System Test; EVAP System Test; Exhaust System Test; Various Pipe Fittings Test. (Note: Not applicable to air conditioning system piping, Lamp housing) It can quick to find evap leaks.🚩 Save Money by Using Baby Oil or Mineral Oil:You don't need to buy expensive smoke oil. Use baby oil, Pure #5 white oil is the best choice if available. This makes ANCEL S3000 smoke machine automotive practically free to use forever!🚩 Easy To Use:The Smoke Machine Automotive with easy-use function and portable design, can help mechanic produce lots of smoke within 30s to detect the leaks in pipe system, dramatically reducing diagnostic time.Full System Diagnostics, Don't Miss Any Leaks.▶Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage. ▶Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power. ▶Car Sealing Test: poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc. ▶Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough ▶Turbo Test: the leakage of coolant would cause the engine to report high water temperature. ▶Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses. ▶EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling ▶Exhaust System Test: Uncleaned harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.Smoke Machine Leak Status IndicationQuick vehicle leak diagnosis by pressure display 📌 NO Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system. 📌 Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system. 📌Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.Overheat & Anti-Frost ProtectionFor detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehicles, ATVS,light trucks and speedboats,Suitable for all car models. ● Overheat Protection When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off. ● Anti-frost Protection The device can also work normally at -20℃.Independent Switch Control DesignAir mode: Independent controlled built-air pump. Smoke mode: Independent controlled smoke generator.Viewable Pressure GaugeThe Automotive EVAP Smoke Machine equipped with a liquid filled pressure gauge. By observing the change of pressure gauge, the leakge situation is clear at a glance. Adjustable Air Flow Output Flow: <6 L/min Air flow meter with adjustable button, easy to control the smoke effect. Fast Smoke Output This machine built-in air compressor, with superior wick and heating element. It can produce smoke instantly by heating up USP mineral oil or baby oil. 4ft Smoke Outlet Pipe can help reach and connect perfectly.Wide Range of ApplicationsSuitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault.How to Use the Automotive Fuel Smoke Leak Detector?Notice before Leak Test: Turn OFF the Ignition of Your Vehicle● Assemble the smoke machine with delivery hose, power socket and hook. ● Unscrew the oil filler cap and add test oil.(Pure #5 white oil is the best choice if available) ● Disconnect the pipes that need to be connected with the smoke leak detector. ● Connect your car smoke machine’s power cord to 12V vehicle battery (red clip to battery positive and black clip to a good ground, then the Power LED would be ON, if else check the power supply) ● Introduce the smoke delivery hose into the pipeline to be tested via the Adapter Cone. ● Press Air Control Switch, wait for seconds until the system is pressurized, check the Pressure Gauge & Flow Meter reading for leak status. Turn on the smoke generator, adjust the smoke amount to suitable amount so you can locate the leak position quickly. ● The leak can be judged according to where the smoke appears.ANCEL S3000 smoke machine automotive Parameter● Output pressure:7-12 PSI ● Output flow:<6L/min ● Power supply: DC12V,vehicle battery ● Air source: built-in ● Test oil capacity:10ml-20ml ● Material:Iron ● Length of Power Cord: 2.5Meters ● Length of Smoke Hose: 2.5Meters ● Test Oil:Mineral Oil or Baby Oil(oil not include) ● Multi Protections:Oil Outlet, Over-Heat and Over-Load Protection ● Machine Size:13cm x 8.5cm x 18.5cm ● Package Weight: 2.3kg/5 lb● Oil Refill Port: For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit. ● Velcro Strap For collection of the smoke delivery hose, and power cord before storage. ● Pressure Gauge: Displays the output pressure of the machine or show the real time pressure of the system been testing. ● Air Flow Meter: Provide a quick visual indication of the amount of air/smoke passing through the system being tested. ● Flow Dial: Easy to control the smoke and air amount, determine the exact location of the leak easily and quickly ● Oil Level Gauge: Allow you to accurately control the test oil volume. Smoke Control: After pressing this switch, the power indicator light is on to indicate that the power supply is normal. ● Air Control: Press the AIR MODE, pump starts working, only after this, you may press and start the SMOKE MODE.ANCEL S3000 Packing Lists1x ANCEL S3000 Main Unit 1x Power Cord: To offer connection from the unit to the automobile battery, in order to drive the unit. 1x Funnel: Assistance method for smoke oil refill, to prevent pour oil to the unit surface. 1x Hook up: To hang the smoke machine in the car 1x User Manual: Detailed descriptions about how to use the smoke machine automotive. 1x Intake Bladder: To fit the intake and exhaust, seal the system and introduce smoke into the system. Especially while the inlet position is not rounded-shape. 1x Adapter Cone: To fit the intake and exhaust, seal the system and introduce smoke into the system. It may fall out at high pressure and need a second hand to push and hold at operation. 1x Replacement Rubber: The rubber on the Intake Bladder may be easily broken, if not operate it properly with caution.The rubber could be replaced with new one without replace the whole Intake Bladder. 1x Smoke Delivery Hose: For introduction of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the vacuum pipe directly.Difference between S1000, S2000 and S3000the function of the Pressure Gauge: We can directly determine whether the pipeline is leaking through the value of the pressure gauge. If the pressure gauge is less than 0.5bar, it can be judged that there is a leak. The smaller the pressure, the greater the leak. At this time, you can find the leak through the smoke leak. Point and fix it in time The function of Flow Indication: The flow meter is an indicator to intuitively judge whether there is a leak and the size of the leak. When the flow indicator bead is at the bottom of D, it indicates that the pipe is good and there is no leakage. The higher the bead position, the greater the leakage.PAYMENTDELIVERY DETAILSTERMS OF SALESABOUT USCONTACT USPAYMENTWe accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment.Please contact us if you need to use another method to pay.Payment should be made within 4 days after bidding ends.Otherwise an Unpaid Item case will be opened to you.We are not responsible for buyers’ local taxes.Please include your special requests in eBay note if there is any. We reserve the final right of sellingDELIVERY DETAILSOrder will be shipped within 1 business day after payment confirmed.We have warehouse in USA,UK,HongKong,Australia,Russian,Germany and China warehouse.From our US/UK/RU/DE/AU warehouse via USPS or UPS eCommerce shipping,Delivery time varies from 2 to 6 business days.From our China warehouse via DHL or Fedex,Delivery time varies from 5-12 business days.We will ship according to your payment address,Please make sure it is correct and include phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.Please include your special requests in eBay note if there is any.TERMS OF SALESWe can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory.We don't take charge to complete clearance when parcel arrived at your Customs(Because we sold at a low price,good quality,limited profit only),but we will do all what we can to help you get your package.Please do not hesitate to leave us your positive feedback if you are happy with your shopping. if you are just a little satisfied with your purchase, please do not leave us negative or neutral feedback before contacting us.We are not responsible for Buyer's Local TaxsABOUT USWe are eager to be your professional parner of automobile diagnostic tool.We support remote assistance by teamviewer if you have any difficulty in software installation.CONTACT USIf you are satisfied with our product or our service, please leave Positive FeedbackIf you have any question,please feel free to contact us first before you leave feedback , we will try our best to solve the problemBusiness time: GMT8( 9:00 am-6:30 pm) monday to saturdayBrandANCELManufacturer Part NumberANCEL S3000 Automotive EVAP Smoke MachineTypeEVAP MachineOBD InterfaceCAN, EOBD, OBDIISupported SystemEVAPVehicle TypeATV, Heavy Duty/Commercial, Motorcycle, Passenger VehicleWarranty3 YearOn May 22, 2023 at 03:52:21 PDT, seller added the following information:
Price: 179 USD
Location: Rowland Heights, California
End Time: 2023-08-12T09:30:10.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: ANCEL
Manufacturer Part Number: ANCEL S3000 Automotive EVAP Smoke Machine
Type: EVAP Machine
OBD Interface: CAN, EOBD, OBDII
Supported System: EVAP
Vehicle Type: ATV, Heavy Duty/Commercial, Motorcycle, Passenger Vehicle
Warranty: 3 Year