40AMP MPPT Solar Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB

Description: 40AMP MPPT Solar Battery Charge Controller 12V/24V LCD Regulator Auto Dual USBAdvantages:12V 24V 40A mppt Controller w/LCD Display,fit for 12V 24V AGM, Gel, Flooded and Lithium BatterySolar Regulator 40A, work with 60W~960W Solar power, Max input 480W100V Solar Power when the battery is 12V, Max input 960W 100V when the battery is 24V.Work with Lithium or lead-acid battery charging parameter preset, Advanced MPPT maximum power point tracking technology solar charge controller, tracking efficiency is no less than 99.5%.Controller Rated charge current 40A, the charging maximum conversion efficiency can reach 97 %.Solar controller 40amp with Excellent heat sink design and Multiple load control modes: 24Hours Working, Light Control, Light+Time Control Feature:Advanced MPPT maximum power point tracking technology charge controller with tracking efficiency is no less than 99.5%.High-quality components solar charger the maximum conversion efficiency can reach97%.Super fast maximum power tracking speed controller while ensuring tracking efficiency.Accurate identification and tracking of the full power point of the multi-wave peak.Reliable maximum input power of pv array to ensure the safety of the equipment.12 24v AUTO voltage identification, wide pv array full power point operating voltage range.The LCD is designed to dynamically display the operation data and working status of the equipment.Various load control modes: general mode, light control mode, dual time mode, pure charger mode, and timing mode.Lead-acid and lithium charging processes can be selected.Additional customization required , Use the RS485 methods to maximize the communication needs of different occasionsdual USB port charging NOTE: The controller will start the PWM function at the high voltage disconnection (HVD) voltage point, which limited voltage rising to protect the battery.40amp solar charge controller's parametercontroller Rated charge current: 40ASystem rated voltage: 12V 24V AUTOvoltage range of battery: 8-32V lead-acid or lithiumMax open voltage of Pv module: 100VMax Solar Power: 480W when battery is 12V； 960W when battery is 24VLight control voltage: 5VCharge loop voltage drop: ≤0.29vLCD Temperature: -20°C~+70°cOperating Temperature: -20°C~+55°C (To run at full rated current continuously)Working humidity: ≤95%No condensationProtection class: IP30 3 modes load working design:Manual mode: you can turn on/off your LOAD manualSolar light control Mode: When PV voltage drop to 5V, controller identified as sunset, then turn on the LOAD； Morning PV voltage raise to 5V, the controller identified as Sunrise will turn off your Load.Solar light+Time control Mode: Sunset turn on Load, then set a working time, controller will turn off at specified time which set by yourself. PowMr MPPT Controller New DesignController with Great Heat sinkHigh-quality components Clear display and Simple wiring to useEASY WIRING: Press and push forward the controller's cover first, then insert your battery cable and PV cable,Clear display: Use Menu and Set, to view the controller's charging parameter. Wiring tips 1. For Safety, When installing your battery and PV cable, Please make sure your Breaker is on an Open position, which means the cable has no power going through the cable. 2. After PV and battery cable are installed, Close the Battery's Breaker first, let the controller read your battery, and power it on. 3. Close the PV breaker and let the PV power enter the controller to charge your battery. PowMr EverywhereDelivery detailsTerms of salesAbout usContact usPowMr Everywhere

Price: 39.59 USD

Location: Walnut, California

End Time: 2024-10-19T09:47:10.000Z

Shipping Cost: N/A USD